Busch-Jaeger Busch-SmartTouch ST/U10.1.11-811 Product Manual page 26

Product Overview
When using the touch panel together with the Busch-Installationsbus ® KNX, up to 18 functions
can be positioned on one operating page. In connection with a configuration with the Busch-
Installationsbus ® KNX, a total of up to 25 operating pages with a total of 450 control elements
can be configured (the audio control element occupies at least four function positions). For a
configuration via the Busch-free@home ® System Access Point, the scope of functions of the
®
Busch-free@home App Next is used. The device can also be used for fault and alarm
messages.
®
For the integration in a Busch-Installationsbus KNX system the touch panel is configured with
the KNX commissioning tool ETS Touch DCA App, which available in the KNX shop free of
charge. The commissioning tool is embedded in the ETS and allows direct access to group
addresses and flags of communication objects. The control element consists of freely
programmable touch surfaces. For the integration in a Busch-free@home ® system, the
commissioning is carried out via the Web-based user interface of the System Access Point.
Product manual 2CKA001473B5342 │26