Table of Contents
Advertisement
Commissioning of the KNX function via BJE DCA SmartTouch 10 (from
9.10.7
Application "Internal RTC"
This application has no application page. The internal room temperature controller (RTC) can
be controlled via the "RTC control element" (extension unit). For this the control element must
be allocated accordingly and equipped with group addresses.
The general settings can be made via the DCA as follows:
1. Open the "Applications" tab in the library area.
2. Open the "Internal RTC".
–
The general settings for this application are displayed in the "Parameter" area and can
be edited here.
Notice
Individual internal RTCs can be created. These can also be added via the work
area.
■
■
■
For further setting or selection options via the "Parameter" area for the general settings of the
function of the internal RTC, see chapter 9.10.7 "Application "Internal RTC"" on page 106.
Product manual 2CKA001473B5342
Here a page with a plus is displayed. This page must be clicked. This is how
a further internal RTC is added and displayed in the tree structure.
If it is called up via the tree structure, the settings can be adjusted for the
individual internal RTCs in the "Parameter" area.
By clicking the arrow next to "Internal RTC", all available internal RTCs are
displayed.
ETS5)
│106
Advertisement
Table of Contents
