10.20.7 Name of scene
Options:
Designation of scene. The length of the name is limited to 60 characters.
10.20.8 Scene number
Options:
The number of the scene is set via the parameter.
10.20.9 Light scenes can be started with a
Options:
The parameter is used to specify with which separate 1-bit communication object the light scene
is started.
10.20.10 Light scene can be stored
Options:
The parameter is used to specify whether the light scene can be stored.
–
Deactivated: The light scene will not be stored.
–
Activated: The light scene can be stored.
10.20.11 Object x is to be changed
Options:
–
Deactivated: No additional parameters available.
–
Activated: Parameter "Value for object x" appears.
Product manual 2CKA001473B5342
KNX control elements and application parameters
<Text>
Setting option from 1 - 64
0
1
Both
Disabled
Activated
Deactivated
Activated
Notice
The setting options for parameter "Value for object x" depend on the setting
of parameter "Object type x".
Application "Scene actuator"
│213