Table of Contents
Advertisement
10.24.141
Settings of fan coil unit — Fan speed limit/level limit during Eco mode
Options:
This parameter limits the fan speed level when the system is switched to eco mode.
10.24.142
Fan settings heating
Notice
Only available when parameter "Number of fans" is set on "Heating/cooling via
two systems".
Notice
Additional parameters for "Fan settings heating" are available under "Fan coil
unit settings".
10.24.143
Fan settings cooling
Notice
Only available when parameter "Number of fans" is set on "Heating/cooling via
two systems".
Notice
Additional parameters for "Fan settings cooling" are available under "Fan coil
unit settings".
10.24.144
Fan settings - Level output
Options:
This parameter is used to specify whether the level output is set according to the value table or
individually.
Product manual 2CKA001473B5342
KNX control elements and application parameters
Deactivated
Activated
According to standard value table
Specify individually
Application "Internal RTC"
│277
Advertisement
Table of Contents
