Table of Contents
Advertisement
The parameter is used to specify the logic gate the communication objects are to be linked
with. See the explanation above.
Object type input x:
Options:
The parameter is used to specify whether the input object consists of a 1-bit value (0/1) or a
1-byte value (0 - 255). See the explanation above.
Initial value input x:
Options:
See the explanation above.
Logic input x:
Options:
See the explanation above.
Object type output:
Options:
The parameter is used to specify whether the output object consists of a 1-bit value (0/1) or
a 1-byte value (0 - 255). See the explanation above.
Sending output objects:
Options:
The parameter is used to specify when the output object is sent.
Value of the output object at logic true:
Product manual 2CKA001473B5342
KNX control elements and application parameters
1 bit
1 byte
Notice
How many "Object type input x" parameters are displayed depends on the
setting of the "Number of input objects" parameter.
Initialised with 0
Initialised with 1
Notice
How many "Initial value input x" parameters are displayed depends on the
setting of the "Number of input objects" parameter.
Normal
Inverse
Notice
How many "Logic input x" parameters are displayed depends on the setting
of the "Number of input objects" parameter.
1 bit
1 bytes
With each input telegram
With a change of the output object
Application "Logical functions"
│218
Advertisement
Table of Contents
