Object Type 1 / Value 2 - Busch-Jaeger Busch-SmartTouch ST/U10.1.11-811 Product Manual

– Pressing/releasing: Pressing = value 1; releasing = value 2.
The following supplementary parameters are available, see chapter "Object type 1 / value 2"
on page 114:
– Object type value 1: When actuated (pressing) the control element sends telegrams via
the associated communication object. This parameter is used to specify the size of the
communication object.
– Object type value 2: When actuated (releasing) the control element sends telegrams via
the associated communication object. This parameter is used to specify the size of the
communication object.
– Short/long: Short press = value 1; long press = value 2.
The following supplementary parameters are available, see chapter "Object type 1 / value 2"
on page 114:
–
Long operation after...:
Options:
The parameter is used to specify how long the button must be pressed to recognize a
long operation.
– Object type value 1: When actuated (short press) the control element sends telegrams
via the associated communication object. This parameter is used to specify the size of
the communication object.
– Object type value 2: When actuated (long press) the control element sends telegrams
via the associated communication object. This parameter is used to specify the size of
the communication object.
10.1.6

Object type 1 / value 2

Options:
Parameters "Object type value 1" and "Object type value 2" are used to specify the size of the
communication object.
Product manual 2CKA001473B5342
KNX control elements and application parameters
Setting option from 0.3 - 10 seconds
Inactiv
Switch
Forced operation
1-byte value [0% - 100%]
1-byte value [0 - 255]
1-byte value [-128 - 127]
Scene number
RTC operating mode
Temperature
2-byte value [-32768 - +32767]
2-byte value [0 - 65535]
2-byte floating point
4-byte value [-2147483648 - 2147483647]
4-byte value [0 - 4294967295]
14-byte text
"Switch" control element
│114