Table of Contents
Advertisement
Room temperature controller (basic version)
Air conditioners can be controlled with the control element for room temperature controllers.
Control
RTC control element
(extension unit)
RGBW operation (basic version)
Specific settings can be made for corresponding lamps (LEDs, Philips Hue, etc.) with the
RGBW control elements. For example, the colours can be changed or the warm-white
component can be adjusted.
Control
RGBW operation
Product manual 2CKA001473B5342
Status
Status
Function
The current operating mode and the mode of
the controller (e.g. heating) are displayed in the
control element.
Additional operating modes can be called up
with swiping movements. Control is carried out
via the buttons.
Function
The lamp is switched on or off with a press of
the control element.
It can also be used to make a preset. The value
display indicates the brightness component. In
line with the lamp types and presets in the
commissioning software, additional functions
can be called up (in the example via the arrow),
e.g. colour or white control.
Preset adjustment:
The lamp must first be set as desired. Then the
lamp is switched on.
Then follows a long press of the control
element. This saves the lamp setting as preset.
Now the preset is called up with each activation
(long press).
This process must be repeated for each
adjustment. The lamp is switched on and off
normally with a brief press.
Operation
│315
Advertisement
Table of Contents
