Making Weekly Timer Settings - Kyocera KM-5530 Operation Manual

3 Use the keypad to enter the 4-digit management code.
The factory default setting for 45 cpm copiers is "4500" and
for 55 cpm copiers is "5500". If the entered code matched the
registered one, the "Weekly timer" ["Week timer"] screen will
be displayed.
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
4
Touch the key that corresponds to the desired weekly timer
setting.
Inch specifications
Weekly timer
Weekly timer
Day of the week Setting mode
Monday 08:30-ON 19:45-OFF
Tuesday 00:00-ON
Wednesday 03:00-OFF
Thursday 08:30-ON 19:45-OFF
Friday All day-OFF
Default setting
Metric specifications
Week timer
Week timer
Day of the week Setting mode
MondayTUESDAY 08:30-ON 19:45-OFF
Tuesday 08:30-ON 19:45-OFF
Wednesday 08:30-ON 19:45-OFF
Thursday 08:30-ON 19:45-OFF
Friday All day-OFF
Default setting
NOTES
• It is possible for you to change the 4-digit management code.
(See "Changing the management code" on page 7-33.)
• Refer to the desired procedure(s) explained under "(3) Making
weekly timer settings" and perform the corresponding setting(s).
Close
Close
Close
Weekly timer
Up
Down
Off
Change #
On
Close
Week timer
Up
Down
Off
Change #
On
Section 7 COPIER MANAGEMENT FUNCTIONS

(3) Making weekly timer settings

Perform the following procedure that corresponds to the desired
setting.
● Programming the weekly timer
Perform this procedure to register the times at which the copier is to
be turned ON and OFF during each day of the week, or whether it will
be left ON or OFF all day on any of those days.
1
Select the day of the week that you want to set the ON and
OFF times for and then touch the "Change #" key.
The setting screen for the selected day will be displayed.
Inch specifications
Weekly timer
Weekly timer
Day of the week Setting mode
Monday 08:30-ON 19:45-OFF
Tuesday 00:00-ON
Wednesday 03:00-OFF
Thursday 08:30-ON 19:45-OFF
Friday All day-OFF
Default setting
Metric specifications
Week timer
Week timer
Day of the week Setting mode
MondayTUESDAY 08:30-ON 19:45-OFF
Tuesday 08:30-ON 19:45-OFF
Wednesday 08:30-ON 19:45-OFF
Thursday 08:30-ON 19:45-OFF
Friday All day-OFF
Default setting
2 If you want to set the time (hour and minutes) that the copier
will be turned ON and OFF during that day, touch the "Select
work time" key and then adjust the "SW ON" and "SW OFF"
times as desired.
Inch specifications
Monday
Set the timer to turn on main SW on/off in a day.
By selectiong "Cancel", set time is invalided once.
Select
SW ON
work time
All day
-OFF
All day
-ON
If On/Off mode is set at same time, main SW will turn off.
Default setting - Weekly timer
Metric specifications
Monday
Set timer to turn main SW on/off for one day.
By selecting "Cancel", set time is invalided once.
Select
SW ON 08:30
work time
All day
-OFF
All day
-ON
If On/Off is set to same time, main SW will turn off.
Default setting- Week timer
Up
Down
Change #
Up
Down
Change #
Back
8:30 SW OFF 19:45
Back
SW OFF 19:45
Close
Weekly timer
Off
On
Close
Week timer
Off
On
Close
Cancel
Off
On
Close
Cancel
Off
On
7-15