Overlaying One Image Over Another [Form Overlay Mode] - Kyocera KM-5530 Operation Manual

Section 5 OTHER CONVENIENT FUNCTIONS

9. Overlaying one image over another [Form overlay mode]

This mode can be used to scan the first original (the "form") into
memory and have its image overlaid onto copies made from
subsequent originals. It is also possible to register and store in
memory, in advance, the images that you want to use as original
forms.
A
B
C
NOTE
Refer to "(2) Form registration" on page 6-1 for the procedure to
register images as forms.
1 Touch the "Function" tab. The content of the "Function" tab
will be displayed.
2 Touch the "Forms Overlay"["Form overlay"] key. The "Forms
Overlay"["Form overlay"] screen will be displayed.
Inch specifications
Ready to copy.
Select 2 sided/
paper Separation
Exposure
Reduce
mode /Enlarge
Orig.image Margin/
quality Centering
Sort/ Border
Finished
Erase
Basic User choice
Metric specifications
Ready to copy.
Select 2-sided/
paper Split
Exposure Reduce/
mode Enlarge
Image Margin/
quality Imag. shift
Sort/ Erase
Finished Mode
Basic User choice
5-20
A
B
C
Paper size
11x8 1 /
2
Select
Combine
orig. size
Auto Batch
Up
Selection scanning
Forms
Page # Down
Overlay
Cover
Booklet
Mode
Function Program
Paper size
Select
Merge copy
size orig.
Auto Large # of
Up
selection originals
Page
Form
Down
numbering
overlay
Cover
Booklet
Mode
Function
Program
3 Touch the "On" key.
The screen to set the shading level of the form image will be
displayed.
Inch specifications
Ready to copy.
Forms Overlay
Off
On
Metric specifications
Ready to copy.
Form overlay
Of
On
4 Touch the "+" key or the "-" key to select the level of shading
that you want to use for the original form.
The desired shading level can be set to any 10% increment
between 10% and 100%.
* A sample of the effect that the selected shading level will
produce will be displayed to the right of the entry field.
Inch specifications
Forms Overlay
Set
"
Off
On
Metric specifications
Form overlay
Set
Off
On
5 If you want to use a previously registered image as the form,
touch the "Form Selected" ["Form selection"] key and go to
the next step.
If you want to scan in a new image, go directly to step 9.
Register
Use the first scanned image as a form
for copy after second original image.
Register
1 s t s c a n n e d i m a g e c a n b e u s e d a s a fo r m
fo r c o py a f t e r s e c o n d o r i g i n a l i m a g e.
Place from first then press start.
Register
(10~100)
50
Exposure %
Scan form once
Form
Selected
Set form.
Press Start Key.
Register
(10 100)
Exposure 50 %
Scan form once
Form
selection
Paper size Set
11x8 1 / "
2
Back Close
Paper size
Set
Back Close
Back Close
Back Close