Kyocera KM-5530 Operation Manual page 196

Section 7 COPIER MANAGEMENT FUNCTIONS
● Customize screen layout (Add functions)
Perform the following procedure to add often-used functions and/or
modes, or to change the order of their layout, in order to make the
display more appropriate to the way you use the copier.
1 Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-38.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Select "Customize(Add function)" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Customize(Add function)" screen will be displayed.
Inch specifications
Default setting
Copy default
Default menu
Modify Copy
Job Queue Report
Display register key
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting
Copy default
Default menu
Modify copy
Job Queue Report
Display"Register"key
Customize(Main function)
Customize(Add function)
Default setting
7-62
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
Form
Language Management
Bypass Hard Disk
setting
Management
Print
Form
Setting mode
On / Off
On(All job)
On
Change #
Setting mode
On / Off
On(All jobs)
On
Change #
3 If you want to add functions and/or modes to the "User
choice" tab, touch the "▲" or the "▼" cursor key under the list
on the right to select the item you want to add. Then touch
the "▲" or the "▼" cursor key under the list on the left to
select in what order you want it to be added in that tab.
Finally, touch the "b" key to add the selected item to the
"User choice" tab.
Inch specifications
Customize(Add function)
Basic
End
User choice
D e fa u l t s e t t i n g - C o py d e fa u l t
Metric specifications
Customize(Add function)
Basic
End
Week
User choice
timer
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
Close
Up
5 Touch the "Close" key once again. The touch panel will return
Down
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Back Close
Register mode Addition mode
Margin None
Border Erase Select paper
Combine Combine
None Auto Selection
Batch scanning
None
None Margin
Back Close
Addition Mode
Register mode
Erase None
Cover Select paper
None Merge
Test copy Auto selection
Batch scanning
None
Form Overlay Margin