Kyocera KM-5530 Operation Manual page 161

● Paper type (for high-resistance paper)
Perform the following procedure to set whether or not the high-
resistance paper function will be turned on for each custom type of
paper (custom 1 - 8).
NOTES
This setting will only be effective if the corresponding custom paper
type (custom 1 - 8) is selected for use in one of the
drawers[cassettes], or the multi-bypass tray.
Refer to "Paper type (drawer[cassette] No.1 - No.5)" on page 7-24 for
selecting the type of paper to be loaded in each drawer[cassette] and
to "(1) Paper size and type" on page 7-63 for selecting the type of
paper to be set on the multi-bypass tray.
1
Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Select "Sel.(High resist.paper)" ["Sel.'High resist.paper'"] in
the settings list on the left side of the touch panel and then
touch the "Change #" key. The "Sel.(High resist.paper)"
["Sel.'High resist.paper'"] screen will be displayed.
Inch specifications
Default setting
Machine default
Default menu
Paper type(5rd drawer)
Select paper type(2sided)
Select paper (Used Paper)
Sel. (High resist. paper)
Auto shut-off time
Default setting
Metric specifications
Default setting
Machine default
Default menu
Paper type (5rd cassette)
Select paper type(2sided)
Select 'used paper' type
Sel.'High resist.paper'
Auto shut-off time
Default setting
Language Management
Bypass BOX
setting Management
Print
Form
Language Management
Bypass Hard Disk
setting Management
Print
Form
Setting mode
Plain
90 Minute
Change #
Setting mode
Plain
90Minute
Change #
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Select the custom paper setting that you want to change and
then touch the "On / Off" key. Touch the "On" key to turn the
high-resistance paper function ON.
Inch specifications
Sel. (High resist. paper)
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Default setting - Machine default
Metric specifications
Sel.'High resist.paper'
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Default setting - Machine default
4 Touch the "Close" key. The touch panel will return to the
End
screen in step 2.
Weekly
timer
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
● Auto shut-off time
End
Perform the following procedure to set the amount of time that will
Week
elapse after copying, or if no operation is performed, before the auto
timer
shut-off function turns the copier OFF.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Close
Up
Down Metric specifications
Close
Up
Down
Select paper type(s) for High resistance paper.
Default menu Setting mode
Off
Off
Off
Off
Off
Off
Off
Able to select paper type for 'High resistance paper' copy
Default menu Setting mode
Off
Off
Off
Off
Off
Off
Off
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine Document
default Management
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine Document
default Management
Back Close
On/
Off
Back Close
On/
Off
End
Weekly
Management
timer
BOX
Management
Print
Form
End
Week
Management
timer
Hard Disk
Management
Print
Form
7-27