Kyocera KM-5530 Operation Manual page 118

Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
NOTE
It is possible to change the order of display for the stored documents.
To do so, touch the "Order of indication" key, and then touch the "Sort
by date" key or the "Sort by name" key, as appropriate.
4 Touch the "Select paper" key, the "Sort/Finished" key and/or
the "1 sided/ 2 sided" key, to perform the corresponding
settings.
If you want to access the "Form Overlay" key, the "Margin"
key, the "Cover Mode" key, the "Page #" key, the "Booklet" key
and/or the "Select of Output" key to make those settings,
touch the "Edit" key.
5 Press the [Start] key.
Print out will start.
6-6
3 Checking stored documents and changing their names
Perform the following procedure when you want to verify the name of
stored documents, the size of the original documents or the date and
time they were stored in the shared data box, or when you want to
print out the first page of those document in order to check them. You
can also use this procedure to change the registered name for the
documents.
1 Press the [Document Management] key. The "Document
Management" screen will be displayed.
2 Touch the "Document printing" key or the "Box Editing" key
under "Shared Data Box". The "Document printing" screen
or the "Box editing" screen, as appropriate, will be
displayed.
Inch specifications
Select function.
Document Management
Shared Data Box
Document Document
reg. printing
Box
Editing
Metric specifications
Select function.
Document Management
Shared Data Box
Document Document
registr. printing
Box
Editing
25/10/'01 19:20
Synergy Print Box Form box
Document Document Form
reg. printing reg.
Box Box
Editing Editing
25/10/'01 19:20
Synergy Print Box Form box
Document Document
Form
registr. printing registr.
Box Box
Editing Editing
End
End