Kyocera KM-5530 Operation Manual page 52

Section 5 OTHER CONVENIENT FUNCTIONS
5 Select the desired direction of the layout.
Inch specifications
<Layout A>
to copy.
Layout
Metric specifications
<Layout A>
to copy.
Layout
6 Select the type of the borderline that you want to use to
separate the different areas.
7
Press the [Start] key.
Scanning of the originals will start.
If you set the originals in the Document Processor, copying
will start automatically.
If you set an original on the platen, a message will appear
telling you to set the next original. In this case, go to the next
step.
8 Replace the first original with the next one and press the
[Start] key. Scanning of that next original will start.
9 Once you have finished scanning all of the originals, touch
the "Scanning finished" key. Copying will start.
5-10
<Layout B>
to copy.
Register
Layout
Border line
None
Solid
Dotted
Borders
<Layout B>
to copy.
Register
Layout
Border line
None
Solid
Dotted
Cropmark
Register
Border line
None
Solid
Dotted
Borders
Register
Border line
None
Solid
Dotted
Cropmark