Auto Preheat Time - Kyocera KM-5530 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
2 Select "Auto shut-off time" in the settings list on the left side
of the touch panel and then touch the "Change #" key.
The "Auto shut-off time" screen will be displayed.
Inch specifications
Default setting
Machine default
Default menu
Paper type(5rd drawer)
Select paper type(2sided)
Select paper (Used Paper)
Sel. (High resist. paper)
Auto shut-off time
Default setting
Metric specifications
Default setting
Machine default
Default menu
Paper type (5rd cassette)
Select paper type(2sided)
Select 'used paper' type
Sel.'High resist.paper'
Auto shut-off time
Default setting
3 Touch the "+" key or the "-" key to change the displayed time
to the desired setting (between 15 minutes and 240
minutes).
Inch specifications
Au t o s h u t - o f f t i m e
Select auto shut-off time after last setting,
or when copying is done.
+
–
Default setting - Machine default
Metric specifications
Auto shut-off time
Select auto shut-off time after last setting,
or when copying is done.
Default setting - Machine default
NOTES
• It is recommended that you try to set a longer time interval before
auto shut-off engages if you use the copier frequently, and to a
shorter time if there are long intervals between use.
• If you want to quit the displayed setting without changing it, touch
the "Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
7-28
Setting mode
Plain
90 Minute
Change #
Setting mode
Plain
90Minute Change #
Back
M i nu t e
Back
Minute
● Auto preheat time
Perform the following procedure to set the amount of time between
the point that copying ends and the energy-saving preheat mode
engages.
1 Display the "Machine default" screen.
Close
(See "(2) Accessing the machine default settings" on
page 7-21.)
Up
Down Inch specifications
Default setting
Default setting
Copy
default
Machine
Close default
Up
Down
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Close
2 Select "Auto preheat time" in the settings list on the left side
of the touch panel and then touch the "Change #" key.
The "Auto preheat time" screen will be displayed.
Inch specifications
Default setting
Machine default
Close

Auto preheat time

Key sound ON/OFF
Silent mode
Date/Time
Time difference
Default setting
Metric specifications
Default setting
Machine default
Auto preheat time
Key sound ON/OFF
Silent mode
Date/Time
Time difference
Default setting
Language
Bypass
setting
Document
Management
Language
Bypass
setting
Document
Management
Default menu Setting mode
15 Minute
On
Off
30/10/'01 14:02
GMT+08:00
Default menu Setting mode
15Minute
On
Off
25 / 10 / '01 14:02
GMT+00:00
End
Weekly
Management
timer
BOX
Management
Print
Form
End
Week
Management
timer
Hard Disk
Management
Print
Form
Close
Up
Down
Change #
Close
Up
Down
Change #