Erased Border Width - Kyocera KM-5530 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
● Erased border width
Perform the following procedure to determine the default value for the
width of the border to be erased in the two border erase modes.
1 Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-38.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Select "Default erase width" in the settings list on the left side
of the touch panel and then touch the "Change #" key.
The "Default erase width" screen will be displayed.
Inch specifications
Default setting
Copy default
Default menu
Manual exp. adj.(Text)
Manual exp. adj.(Photo)
Default margin width
Default erase width
Preset limit
Default setting
Metric specifications
Default setting
Copy default
Default menu
Manual exp. adj. (Text)
Manual exp. adj. (Photo)
Default margin width
Default erase width
Preset limit
Default setting
7-56
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
Form
Language Management
Bypass Hard Disk
setting Management
Print
Form
Setting mode
Standard
Standard
Left 1 / " 0"
4
Border 1 / " Center 1 / "
4 4
999Set Change #
Setting mode
Standard
Standard
Left 6mm 0mm
Border 6mm Center 6mm
Change #
999 Set
3 Touch the "+" key or the "-" key under the "Border" and
"Center" fields to change the displayed widths to those
desired.
Inch specifications
Default erase width
Adjust default setting of erase width.
End
Default setting - Copy default
Metric specifications
Default erase width
Adjust default setting of erase width.
End
Week Default setting - Copy default
timer
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
Close
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
Up
Down
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
(0~ 3 / ) (0~1 1 / )
4 2
1 / 1 /
Border " Center "
4 4
+ +
– –
(0~18) (0~36)
6 12
mm mm
Border Center
+ +
– –
Back Close
Back Close