Memorizing Frequently Used Settings; Program Function]; Registering A Program - Kyocera KM-5530 Operation Manual

25. Memorizing frequently used settings [Program function]
Up to eight combinations of copy modes and other functions
displayed on the operation panel can be registered as a single
program using this function. You can also register a name for each
registered program.

(1) Registering a program

1 Set the desired copy modes, etc., to be registered.
2 Touch the "Program" tab. The content of the "Program" tab
will be displayed.
3 Touch the "Register" key.
Inch specifications
Ready to copy.
Recall
Basic User choice
Metric specifications
Ready to copy.
R e c a l l
Basic User choice
4
Touch any key that is marked "No registration" and that
corresponds to the program key (1 – 8) under which you
want to register the settings. The screen to register a name
for that program will be displayed.
Inch specifications
Register present setting
Select program number.
No registration
No registration
No registration
No registration
Metric specifications
Register present setting
Select program number.
No registration
No registration
No registration
No registration
Paper Size
11 x 8
1
Reg./delete
Register
Delete
Change
name
Function Program
Paper size
Reg./delete
Register
Delete
Change
name
Function Program
No registration
No registration
No registration
No registration
No registration
No registration
No registration
No registration
Section 5 OTHER CONVENIENT FUNCTIONS
5 Use the displayed keyboard to enter the desired name and
then touch the "End" key.
Inch specifications
Metric specifications
Set
"
/
2
NOTE
Refer to "Entering characters" on page 7-75 for information on
entering characters.
Set
6 Touch the "Yes" key or the "No" key, as appropriate.
If you selected "Yes", the selected program will be registered
and the touch panel will return to the screen in step 3.
Copying is now possible using the settings that were
registered under that program.
Inch specifications
Register program.
End
Metric specifications
Register program.
End
Program # : 1
Program name :Catalog A
The set program is registered. Is it correct?
Yes No
Program # : 1
Program name : Catalog A
The set program is registered. Is it correct?
Yes No
Stop
Stop
5-51