Kyocera KM-5530 Operation Manual page 171

Default setting
Copy limit Sets the limit for the number of copies (or copy sets)
that can be made at a time.
Repeat copying ON/ Sets whether or not to prohibit repeat copying, as
OFF well as whether or not to make repeat copying the
default setting in the initial mode. Sets whether to
turn the repeat copy mode ON or OFF.
Sets whether or not to make repeat copying the
default setting in the initial mode.
"Job history" screen ON/ Sets whether or not the "Job history" screen will be
OFF displayed or not. Also determines the contents of the
displayed information; select "On / reserved" ["On /
Reserv.job"] to have only reserved jobs (copy and
print jobs scheduled during print out of another job)
displayed in that screen.
Registration keys ON/ Sets whether or not to allow a "Register" key to be
OFF displayed in the screen for those function and modes
which can be registered under the registration keys.
Functions and/or modes can only be registered
under registration keys through the "Register" key.
Customize screen layout Changes the order of the main functions and modes
(Main functions) that are displayed in the "Basic" and the "User
choice" tabs in order to make the display more
appropriate to the way you use the copier.
* Up to 6 functions and modes can be listed and
displayed.
Customize screen layout Adds often-used functions and/or modes, and
(Add functions) changes the order of their layout, in order to make
the display more appropriate to the way you use the
copier.
Section 7 COPIER MANAGEMENT FUNCTIONS
Description Available settings
1 – 999 999
Off / On On
Off / On Off
Off / On/All job
On/All job /
On/reserved [On/reserv.
job]
Off / On On
Reduce/Enlarge / 1 Reduce/
Exposure Mode /
Sort/Finish / 2 Exposure
1/2 sided /
Quality orig. / 3 Sort/Finish
Original size 4 1/2 sided
5 Quality orig.
6 Original size
All functions and modes 7 Border Erase
other than those in the
"Basic" tab and the 8 Cover
"main functions" in the 9 (None)
"User choice" tab. 10 Proof Copy
11 (None)
12 Form Overlay
13 (None)
Factory Reference
setting page
7-57
7-58
7-59
7-60
7-61
Enlarge
Mode
7-62
[Erase Mode]
[Test copy]
7-37