Kyocera KM-5530 Operation Manual page 159

● Custom paper type for 2-sided copying
Perform the following procedure to set whether or not each custom
type of paper (custom 1 - custom 8) will be available for use in 2-sided
copying.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Select "Select paper type (2sided)" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Select paper type (2sided)" screen will be displayed.
Inch specifications
Default setting
Machine default
Default menu
Paper type(5rd drawer)
Select paper type(2sided)
Select paper (Used Paper)
Sel. (High resist. paper)
Auto shut-off time
Default setting
Metric specifications
Default setting
Machine default
Default menu
Paper type (5rd cassette)
Select paper type(2sided)
Select 'used paper' type
Sel.'High resist.paper'
Auto shut-off time
Default setting
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
Form
Language Management
Bypass
Hard Disk
setting Management
Print
Form
Setting mode
Plain
90 Minute
Change #
Setting mode
Plain
90Minute
Change #
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Select one of the "custom" paper type settings ("custom 1"
through "custom 8") in the settings list on the left side of the
touch panel and then touch the "On / Off" key to change the
setting as desired. Make sure the setting is "Off" for those
types of paper that you do NOT want to be available for use
in 2-sided copying.
Inch specifications
Select paper type(2sided)
Custom 1
Custom 2
Custom 3
Custom 4
End Custom 5
Custom 6
Custom 7
Default setting - Machine default
Metric specifications
Select paper type(2sided)
Custom 1
Custom 2
Custom 3
Custom 4
End Custom 5
Custom 6
Week Custom 7
timer
Default setting - Machine default
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Close
Up
Down
Select paper type(s) for duplex copy.
Default menu Setting mode
On
On
On
On
On
On
On
Select paper type(s) for duplex copy.
Default menu Setting mode
On
On
On
On
On
On
On
Back Close
On/
Off
Back Close
On/
Off
7-25