Kyocera KM-5530 Operation Manual page 123

NOTES
• If that box was registered with a password, the password entry
screen will be displayed.
Enter the registered password with the keypad and then touch the
"Enter" key.
Inch specifications
password ********
007
Metric specifications
password
********
007 Box Name ABCDEFG
• Refer to "7 Registering a password for a box" on page 6-18 for
information on registering the password.
4 Select the document sets in order of how you want them
printed. Up to 10 sets of documents can be selected.
Up to 10 sets of documents can be selected.
If you are using your computer to print out the documents, go
to the next step.
If you are using the copier itself to print out the documents,
go directly to step 6.
Inch specifications
Document printing
007
JOB005 1
JOB004 1
JOB003 1
JOB002 1
JOB001 1
Document Management - Synergy Print Box
Metric specifications
Document printing
007 Box ABCDEFGHIJK
1
JOB005
JOB004
1
JOB003 1
JOB002 1
JOB001 1
Document Management - Synergy Print Box
NOTES
• It is possible to change the order of display for the stored
documents. To do so, touch the "Order of indication" key, and then
touch the "Sort by date" key or the "Sort by name" key, as
appropriate.
• If you want to print out more than one set of documents, they must
all be of the same size.
Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
(Enter by #key)
Clear
(Enter #-key)
Clear
Order of
Select: 2
Up
indication
WED 15:32 2
Conf/Crrt.
WED 15:33 1
details
WED 15:34
WED 15:35
Select/
Down
WED 15:37 Cancel
001/005
Order of
Select : 2 Up
indication
2
WED 15:32
Check/ Rev.
WED 15:33 1
details
WED 15:34
WED 15:35
Select/
Down
WED 15:37 Cancel
001/005
5 Touch the "w/ current setting" ["Current setting"] key or the
"w/ changed setting" ["Changed setting"] key, as appropriate.
Inch specifications
Stop
Metric specifications
Enter
Stop
If you want to change any of the copy settings, touch the "w/
changed setting" ["Changed setting"] key and then go to the
Enter
next step.
If you do NOT want to change any of the settings, touch the
"w/ current setting" ["Current setting"] key and go directly to
step 8.
6 Touch the "Select paper" key, the "Sort/Finished" key and/or
the "1 sided/ 2 sided" key, to perform the corresponding
settings.
If you want to access the "Form Overlay" key, the "Margin"
key, the "Cover Mode" key, the "Page #" key, the "Booklet" key
and/or the "Select of Output" key to make those settings,
touch the "Edit" key.
7 Press the [Start] key.
Print out will start.
Cancel
8 Touch the "Select paper" key and/or the "Sort/Finished" key to
Print once
perform the corresponding settings, and then press the
all data
[Start] key.
Print out will start.
Finish
selecting
Job cancel
Print once
all data
Finish
selecting
What settings do you apply with data?
Do you want to change current setting?
w/ current w/ changed
setting setting
What settings do you want to apply to the data?
Do you want to change current setting?
Current Changed
setting setting
Stop
Stop
6-11