Replacing The Fuser Oil Roller - MINOLTA-QMS Magicolor 2200 DP User Manual

7
Lower the two transfer roller unit handles.
8
Carefully close the right cover.
Check the release button status to make sure
the cover is properly closed.
9
If necessary, reopen the multipurpose tray
and put the media back in.

Replacing the Fuser Oil Roller

The fuser oil roller provides a lubricant for the printer via an oil-impregnated roller. This
oil is necessary for the proper functioning of the printer.
WARNING!
The fuser unit is hot. When the top cover is opened, the fuser unit temperature
drops gradually (one hour wait time). Do not replace the fuser oil roller until you
are sure that the fuser unit has cooled down.
When the fuser oil roller is worn out, the message "REPLACE OIL ROLLER" appears
and the printer does not print. Replace the fuser oil roller. After the new roller is installed,
printing automatically resumes.
5 "
When you replace the fuser oil roller after a REPLACE OIL ROLLER message
displays in the message window, the printer automatically recovers.
26 Replacing the Fuser Oil Roller