Replacing The Fuser Unit And Transfer Roller Kit - MINOLTA-QMS Magicolor 2200 DP User Manual

2
Insert the bottom of the waste toner pack
into its installation position in the printer.
3
Insert the top of the waste toner pack
into its installation position in the printer
until it is firmly seated.
4
Close the printer's front cover.
If the waste toner pack is not correctly
installed or the transfer belt right release
lever is at its top position (12 o'clock), the
front cover cannot be closed. Turn on the
printer.
5
In the Operator Control/Consumables/Items Replaced/Waste Toner menu, choose
Yes to reset the consumables monitoring system.

Replacing the Fuser Unit and Transfer Roller Kit

WARNING!
The fuser unit is hot. When the top cover is opened, the fuser unit temperature
drops gradually (one hour wait time). Do not replace the fuser oil roller until you
are sure that the fuser unit has cooled down.
When the fuser is worn out, the message "REPLACE FUSER UNIT" appears and the
printer does not print. Replace the fuser kit. After the new fuser kit is installed, printing
automatically resumes.
The fuser kit includes the two items below. When replacing the fuser unit, replace the
transfer roller as well.
„
Fuser unit
„
Transfer roller unit
20
c
d
Replacing the Fuser Unit and Transfer Roller Kit