Service Messages - MINOLTA-QMS Magicolor 2200 DP User Manual

Service Messages

This service message...
SERVICE CALL 04 MAIN UNIT
SERVICE CALL 05 FLASH ROM
SERVICE CALL 08 MAIN MOTOR
SERVICE CALL 09 FUSING MOTOR
SERVICE CALL 0B XFER FAN BELT
SERVICE CALL 0C PWR SUPPLY FAN
SERVICE CALL 0D ENGINE FAN
SERVICE CALL OE SUCTION FAN
SERVICE CALL OF FUSING UNIT FAN
SERVICE CALL 10 POLYGON MOTOR
SERVICE CALL 12 LASER ERROR
SERVICE CALL 14 XFER ROLLER
SERVICE CALL 15 XFER BELT CLN
SERVICE CALL 16 XFER BELT ROT
SERVICE CALL 17 TONER RACK
SERVICE CALL 18 FUS UPP WARMUP
SERVICE CALL 19 FUS UPP LOWTMP
SERVICE CALL 1A FUS UPP HIGHTMP
SERVICE CALL 1B FUS UPP THERM
SERVICE CALL 1C FUS LOW WARMUP
SERVICE CALL 1D FUS LOW LOWTMP
SERVICE CALL 1E FUS LOW HIGTMP
94
Means...
An error has been detected with the
item indicated in the service mes-
sage. Correction of these errors is
performed by a MINOLTA-QMS-
authorized service provider only. Con-
tact your local vendor.
A service message sometimes
occurs as a result of an unusual com-
bination of events, not because of an
actual problem. When the printer
stops and a service message dis-
plays in the message window, turn
the printer off and then back on. This
often clears the service message
indicator, and printer operation
resumes. Always try this before
making a service call.
Service calls should be placed to the
vendor from whom you purchased the
printer. If you cannot get service from
your vendor, see the Service & Sup-
port Guide for additional contact
information.
Status, Error, and Service Messages