Antistatic Protection; Dual In-Line Memory Modules - MINOLTA-QMS Magicolor 2200 DP User Manual

Antistatic Protection

Attention
It's very important to protect the printer controller board and any associated
daughterboard or module from electrostatic damage while performing any task
involving the controller board.
If an antistatic wrist strap is provided in your printer option kit, attach one end of it
to your wrist and the other end to any convenient electrical ground (for example, the
bare metal chassis of equipment, as on the back of a computer, that is plugged in but
turned off). Never attach the wrist strap to any piece of equipment with an electrical
current present. Turn off all power switches first. Plastic, rubber, wood, painted
metal surfaces, and telephones are not acceptable grounding points. The printer isn't
an acceptable grounding point either because it must be unplugged before you
perform this task. If you don't have an antistatic wrist strap, discharge your body's
static electric charge by touching a grounded surface before you handle any printer
boards or components and before removing the controller board. Also avoid walking
around after grounding yourself.

Dual In-Line Memory Modules

Dual in-line memory modules (or DIMMs) are compact circuit boards with surface-mount
memory chips. Your magicolor 2200 printer comes with the following printer memory:
„
Model N—64 MB SDRAM
„
Models GN and EN—128 MB SDRAM
„
Model DP—256 MB SDRAM
However, you can upgrade these models to a maximum of 384 MB of RAM through the
installation of additional DIMMs. Additional memory must be 32, 64, or 128 MB, PC-100
Compliant SDRAM DIMMs.
Antistatic Protection 109