Installing The New Waste Toner Pack - MINOLTA-QMS Magicolor 2200 DP User Manual

4
Press on the front handle of the OPC drum car-
tridge with one hand and hold the front handle of
the OPC protective cover with the other hand.
5
Peel the protective cover off (straight toward
you).
5 "
Dispose of it properly according to your local
regulations.
6
Turn the left release lever of the transfer belt
clockwise to its correct position (2 o'clock).
This lowers the transfer belt.
Also make sure the transfer belt right release
lever is set to its correct position (10 o'clock).
Attention
If the transfer belt left release lever is at its top position (12 o'clock), the waste
toner pack cannot be installed.

Installing the New Waste Toner Pack

1
Remove the new waste toner pack from the drum kit box.
Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack 19