Internal Ide Hard Disk Drive - MINOLTA-QMS Magicolor 2200 DP User Manual

Using a SCSI Interface
5 "
Installing a SCSI interface allows the attachment of external SCSI storage devices, such
as hard drives, JAZ, and ZIP drives. Installing the SCSI interface kit will not allow you to
print via SCSI.

Internal IDE Hard Disk Drive

WARNING!
Make sure that the printer and all accessories are turned off before installing accessories
involving the controller board.
One internal IDE hard disk is supported—standard on the EN and DP models, and optional
on the N and GN models.
What ' s in the Kit?
The IDE hard disk kit includes the following:
„
IDE hard disk with ribbon cable attached
„
IDE hard disk bracket
„
4 screws
Installation
Attention
It's very important to protect the printer controller board and any associated circuit
boards from electrostatic damage. Before performing this procedure, review the anti-
static caution on page 112. In addition, always handle circuit boards by the edges only.
When installing or removing a hard disk, make sure that the metal support posts (on
the hard disk) don't hit any of the electrical leads on the chips mounted on the
controller board. The controller board will not function if any of the leads are broken
or shorted together.
126 Internal IDE Hard Disk Drive