Scsi Interface - MINOLTA-QMS Magicolor 2200 DP User Manual

Using a Network Interface
Once a network interface is installed, refer to "Connecting the Printer to the Host
Computer," in the Installation Guide and the CrownBook for information on connecting
to the network, installing the software, and configuring the interface and the network.

SCSI Interface

The optional SCSI interface allows you to connect up to three optional SCSI devices,
including a hard disk, and Jaz and Zip drives. These devices provide storage for fonts,
emulations, and other files; increase the number of pages that can be collated; and provide
a secondary storage area for spooled data, while providing virtual memory capabilities.
What's in a Kit?
An optional SCSI interface kit includes the following:
„
SCSI interface card
„
SCSI interface card ribbon cable
„
Connector face plate
„
Two larger screws
„
Two smaller screws
Installation
Attention
It's very important to protect the printer controller board and any associated circuit
boards from electrostatic damage. Before performing this procedure, review the
antistatic caution on page 112. In addition, always handle circuit boards by the
edges only.
124 SCSI Interface