Emulations, Fonts, And Other Software - MINOLTA-QMS Magicolor 2200 DP User Manual

Emulations, Fonts, and Other Software

Emulations
Optional emulations, such as ImageServer, LN03, and CGM are available as PostScript
files. This section describes how to download an emulation to the printer's hard disk.
5 "
You must have at least one hard disk, internal or external, attached to the printer in
order to use an optional emulation. If more than one hard disk is available, the
emulation automatically installs itself on the disk with the most free storage space.
MINOLTA-QMS recommends that you have at least 4 MB of memory above the base
configuration and that you add at least 1 MB memory to each emulation installed. This
ensures that the printer can run the emulation without slowing down performance.
Downloading an Emulation via CrownAdmin
We recommend that you use CrownAdmin to download an emulation. Refer to the
CrownAdmin online help for instructions.
Downloading an Emulation via a Parallel Interface
1
Turn on the printer, and wait for IDLE to display in the message window.
2
Insert the emulation CD-ROM or disk in your PC, and change to that drive (for
example, if you're using the D drive, type d: ).
3
Send the emulation to the printer's hard disk. Type
where filename is the name of the installation file and where # is 1 to 3.
4
When downloading is complete, reboot the printer.
The emulation should be listed in the Options section of the printer's startup page, in
the Administration/Emulation printer's configuration menu, and on the advanced
status page.
114
copy filename 1pt#
Emulations, Fonts, and Other Software