Clearing Media Jams - MINOLTA-QMS Magicolor 2200 DP User Manual

Media Tray (Upper Tray Standard on All Models and Optional Tray
Standard on DP Model)
The media tray(s) is (are) located at the bottom front of the printer. The media is picked
from the tray, passed under the OPC drum cartridge and the transfer belt, passed through
the fuser, and delivered via the paper exit unit to the output tray on top of the printer.
Multipurpose Tray (Standard on All Models)
The multipurpose tray is located at the right of the printer. The media is picked from the
multipurpose tray, passed under the OPC drum cartridge and the transfer belt, passed
through the fuser, and delivered via the paper exit unit to the output tray on top of the
printer.
Duplex Unit (Standard on DP Model)
The media is picked from a media tray, passed under the transfer belt, passed through the
fuser, fed into the duplex unit where the media undergoes a change in direction, cycles
through the transfer belt and fuser again, and is delivered via the paper exit unit to the
output tray, which is the top of the printer.
Since several sheets cycle through the printer/duplex unit at the same time, recovering
from a media jam may require the removal of more than one sheet.
To manually duplex, remove the media, flip it over, and reload it.
5-bin Mailbox (Optional on All Models)
The 5-bin mailbox is located on the top of the printer. The media is picked from the tray,
passed under the transfer belt, passed through the fuser, and delivered via the paper exit
unit to the 5-bin mailbox, which is on top of the printer.

Clearing Media Jams

To avoid damage, always remove jammed media gently, without tearing it. Any pieces of
media left in the printer, whether large or small, can obstruct the paper path and cause
further jams. Do not reload media that has jammed.
Clearing Media Jams 57