5
Adjust the media guides to the width of the envelopes.
Make sure the guides are snug enough to keep the envelopes straight, but not so tight
that they buckle the envelopes.
6
Open the flap of each envelope immediately (before it cools) after the envelope is
delivered to the output tray.
5 "
Because the envelopes pass through heated rollers, the gummed area on the flaps
may seal. Using envelopes with emulsion-based glue avoids this problem.
Printing Area
The printing area on all media sizes is up to about 0.157 inch
(4 mm) from the edges of the media.
Media Storage
When storing media, avoid:
„
Direct sunlight
„
Excess heat and humidity
„
Dust
If media has been removed from its wrapper, place it in its original packaging and store in a
cool, dark place on a level surface.
Media Storage
47