Printing Envelopes From The Multipurpose Tray - MINOLTA-QMS Magicolor 2200 DP User Manual

4
Adjust the media guides to fit the size media
you're loading.
Attention
Always adjust the media guides after inserting the media. A guide that is not
properly adjusted can cause poor print quality, media jams, or printer damage.
5
Specify the media size in the multipurpose tray by using the MP Size key on the
control panel.

Printing Envelopes from the Multipurpose Tray

1
Flex the envelope stack (including the edges) to remove any stiffness.
2
Place the envelopes on a flat surface, and flatten them by pressing down the corners.
3
Correct any bent corners, and then tap the envelopes on a flat surface to align them.
4
Place the envelope stack into the multipurpose tray with the flap-side up.
Check your application documentation to determine if the flap should be placed on
the left or on the right. Print a single envelope to check the orientation before print-
ing multiple copies.
46 Loading Media