Removing The Used Waste Toner Pack - MINOLTA-QMS Magicolor 2200 DP User Manual

When the OPC drum is worn out, the message REPLACE DRUM appears. The printer will
not print until the drum kit is replaced.
When you replace the OPC drum cartridge after a DRUM LOW or REPLACE DRUM
message displays in the message window, the printer automatically recovers. However, the
replaced waste toner pack consumables monitoring system must be reset.
The three items below are included in the OPC drum kit. If one needs replacing, replace
all three items.
„
Waste toner pack
„
OPC drum cartridge
„
Laser lens cover
5 "
The OPC drum life is directly related to the number of rotations of the drum. Longest
drum life is achieved with continuous printing. Intermittent printing with small job sizes
requires cleaning rotations before and after each job, and subsequently will impact
OPC life.
The steps are:
„

Removing the used waste toner pack

„
Removing the used OPC drum cartridge
„
Replacing the laser lens cover
„
Installing the new OPC drum cartridge
„
Installing the new waste toner pack
Removing the Used Waste Toner Pack
When the waste toner pack is nearly full, the message "WASTE TONER NEAR FULL"
appears. Prepare to replace the entire OPC drum kit.
1
Turn off the printer.
2
Open the printer's front cover.
14 Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack