Automatic Jam Recovery - MINOLTA-QMS Magicolor 2200 DP User Manual

Make sure that...
You always adjust the media width regula-
tion guides in the multipurpose tray after
inserting the media ( a guide that is not
properly adjusted can cause poor print
quality, paper jams, or printer damage)
You remove transparencies from the output
tray immediately to avoid static buildup.
You load the media (for single-sided pages)
printing-side up in the upper or optional
trays or printing-side down in the multi-
purpose tray (m any manufacturers place
an arrow on the end of the wrapper to
indicate the printing side—if you can't
determine which side of the media to print
on, remove the media from the tray, rotate
the stack a half-turn, turn the stack over,
and then place it back in the tray)
The printer is on a hard, flat, level surface

Automatic Jam Recovery

The magicolor 2200 provides automatic jam recovery (when enabled through the
Administration/Engine/Page Recovery menu). After you remove any jammed media,
printing automatically resumes from the page the printer stopped at when the jam
occurred.
5 "
For automatic jam recovery to work, it is necessary to leave the printer turned on when
you remove the jammed media.
Automatic Jam Recovery
Avoid...
Allowing the output tray to overfill ( the face-down
output tray has a 500-sheet capacity—jamming may
occur if you allow media to accumulate more than
500 sheets at a time )
55