Connections - Smartgen HGM400N Series User Manual

6

CONNECTIONS

Compared with HGM420N, HGM410N has no Mains Voltage 3-phase input terminals. The rear panel of
HGM420N is as below.
Pin Function
1 B-
2 B+
3 Aux. Output 1
4 Crank
5 Aux. Output 2
6 Aux. Output 3
HGM400N Series Genset Controller User Manual
Fig.2 Controller Rear Panel
Table 6 Terminal Connection Description
Cable Size
2.5mm 2 Connected with negative of starter battery.
Connected with positive of starter battery. If wire
2.5mm 2 length is over 30m, better to double wires in parallel.
Max. 20A fuse is recommended.
B+ is supplied by 2 point, rated
1.5mm 2
5A.
B+ is supplied by 2 point, rated
1.5mm 2
5A.
B+ is supplied by 2 point, rated
1.5mm 2
5A.
B+ is supplied by 2 point, rated
1.5mm 2
5A.
Description
For details please
see Table 2.
Page 16 of 38