Table of Contents
Advertisement
Preface
About this document
Intended audience
Organization
x
This document describes how to set up and use the Interface Tile.
This document has been written for experienced hardware and software developers to
aid the development of ARM-based products using the Interface Tile as part of a
development system consisting of a system baseboard, one or more
Versatile/LT-XC2V4000+, a Versatile Core Tile, and an Interface Tile.
This document is organized into the following chapters:
Chapter 1 Introduction
Read this chapter for an introduction to the Interface Tile. This chapter
shows the physical layout of the Interface Tile and identifies the main
components.
Chapter 2 Getting Started
Read this chapter for a description of how to set up and start using the
Interface Tile. This chapter describes how to connect the Interface Tile
and how to apply power.
Appendix A Signals and Pinouts
See this appendix for a description of the signals on the Interface Tile
connectors.
Appendix B Specifications
See this appendix for a description of the mechanical and electrical
specifications for the Interface Tile.
Copyright © 2004-2007. ARM Limited. All rights reserved.
ARM DUI 0188C
Advertisement
Table of Contents
