Table of Contents
Advertisement
Introduction
1.2
Precautions
1.2.1
Ensuring safety
1.2.2
Preventing damage
1-6
This section contains safety information and advice on how to avoid damage to the
Interface Tile.
The tile is connected to the 3.3V and 5V DC supplies on the Logic Tile or Core Tile.
The tile is intended for use within a laboratory or engineering development
environment. It is supplied without an enclosure and this leaves the board sensitive to
electrostatic discharges and allows electromagnetic emissions.
Caution
To avoid damage to the board when it has logic devices mounted, observe the following
precautions.
•
never subject the board to high electrostatic potentials.
•
always wear a grounding strap when handling the board.
•
only hold the board by the edges.
•
avoid touching the component pins or any other metallic element.
Caution
Do not use the board near equipment which is:
•
sensitive to electromagnetic emissions (such as medical equipment)
•
a transmitter of electromagnetic emissions.
Copyright © 2004-2007. ARM Limited. All rights reserved.
ARM DUI 0188C
Advertisement
Table of Contents
