Technical Data; Special Voltages; Overview With Critical Raw Materials, Year Of Production Of The Device; Magicwave 1700 - Fronius TransTig 800 Operating Instructions Manual

Technical data

Special voltages

An inadequately dimensioned electrical installation can cause serious damage.
▶
Overview with Overview with critical raw materials:
critical raw ma-
An overview of which critical raw materials are contained in this device can be
terials, year of found at the following Internet address.
production of www.fronius.com/en/about-fronius/sustainability.
the device
To calculate the year of production of the device:
-
-
-
-

MagicWave 1700

Mains voltage
Mains voltage tolerance
Grid frequency
Mains fuse protection (slow-blow)
Mains connection
Primary continuous power (100% D.C.
Cos phi
Welding current range
Welding current at
Open circuit voltage
100
CAUTION!
The mains lead and its fuse must be dimensioned accordingly.
The technical data shown on the rating plate applies.
Each device is provided with a serial number
The serial number consists of 8 digits - for example 28020099
The first two digits give the number from which the year of production of the
device can be calculated
This figure minus 11 gives the year of production
- For example: Serial number = 28020065, calculation of the year of pro-
duction = 28 - 11 = 17, year of production = 2017
1)
TIG
Electrode
10 min/25 °C (77 °F) 40% D.C.
10 min/25 °C (77 °F) 60% D.C.
10 min/25 °C (77 °F) 100% D.C.
10 min/40 °C (104 °F) 35% D.C.
10 min/40 °C (104 °F) 60% D.C.
10 min/40 °C (104 °F) 100% D.C.
2)
)
2)
2)
2)
2)
2)
2)
230 V
-20% / +15%
50/60 Hz
16 A
Restrictions pos-
sible
3.3 kVA
0.99
3 - 170 A
10 - 140 A
170 A
140 A
110 A
170 A
130 A
100 A
88 V