Fronius TransTig 800 Operating Instructions Manual page 36

No.
(9)
(10)
36
Function
Welding parameters overview
The welding parameters overview contains the most important welding
parameters to be used when welding. The sequence of welding para-
meters follows a clothesline structure. Use the left and right welding
parameter selection buttons to navigate within the welding parameters
overview.
Welding parameters overview
The welding parameters overview contains the following welding para-
meters:
Starting current I
for TIG welding
The starting current I
welding" and "TIG DC- welding" modes.
Main current I
- for TIG welding
- for MMA welding
DownSlope t
down
when TIG welding, the period over which the current is de-
creased from the specified main current I
I
E
The DownSlope t
modes.
Final current I
for TIG welding
Adjusting dial
for altering welding parameters. If the indicator on the adjusting dial
lights up, then the selected welding parameter can be altered.
s
is saved separately for the "TIG AC
S
(welding current)
1
is saved separately for 2-step and 4-step
down
E
to the final current
1