Terms And Abbreviations Used; General; Terms And Abbreviations A - F; Terms And Abbreviations G - H - Fronius TransTig 800 Operating Instructions Manual

Terms and abbreviations used

General

The terms and abbreviations listed here are used in connection with functions
that are either included in the standard scope of supply or that are available as
optional extras.
Terms and ab-
ACF
breviations A - F
AC frequency
C-C
Cooling unit control
dYn
dynamic
Arc force dynamic correction for standard arcs, pulse correction for pulsed
arcs or correction of various welding parameters in CMT (job correction or arc
force dynamic and pulse correction settings in the set-up menu for the Stand-
ard control panel)
Eld
Electrode diameter
When "Eld" is selected for the external parameter "E-P", the electrode diamet-
er on the JobMaster TIG welding torch can be adjusted.
FAC
Factory
Reset welding machine
Terms and ab-
G-H
breviations G - H
Gas post-flow time high
Gas post-flow time at maximum welding current
G-L
Gas post-flow time low
Gas post-flow time at minimum welding current
GPR
Gas pre-flow time
GPU
Gas purger
HCU
Hot-start current
HFt
High frequency time
High frequency ignition
122