ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Note:
1. Use RS-232 port to update firmware.
2. After updating firmware, remember to change the JP5 to the "OP" position and
power cycle the IR-310-RM to run in the operation mode.
The firmware of IR-310-RM can be downloaded from:
ftp://ftp.icpdas.com/pub/cd/usbcd/napdos/ir-310-rm/firmware/
Firmware_Update_Tool can be downloaded from:
ftp://ftp.icpdas.com/pub/cd/usbcd/napdos/ir-310-rm/software/fw_update_tool/
2.6.2 Normal Operation Mode
Set the JP5 to the "OP" in figure 2-11 and power cycle the IR-310-RM to enable the
Normal Operation Mode.
IR-310-RM, IR Controlled 10-ch High Power Relay Module (Ver. 1.1, Jul/02/2013) 15