Sub-Fc 65 (0X41): Set The Time Interval In The Sequential Mode - ICP DAS USA IR-310-RM User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

5.4.16 Sub-FC 65 (0x41): Set the time interval in the sequential mode

The time interval is the gap time between adjacent relays during forward sequential
ON and backward sequential OFF.
‧Request
Byte order Description
00 Address
01 FC
02 Sub-FC
03 Time interval
byte0 (LSB)
04 Time interval
byte1 (MSB)
05 Reserved
06 Reserved
‧Response
Byte order Description
00 Address
01 FC
02 Sub-FC
03 Setting result
Note:
1. The range of the "Time interval" is 0 ~ 65535 ms. (0x0000 ~ 0xFFFF)
IR-310-RM, IR Controlled 10-ch High Power Relay Module (Ver. 1.1, Jul/02/2013) 49
Size Value
1 Byte 1 ~ 247
1 Byte 0x64
1 Byte 0x41
1 Byte 0x00~0xFF. (low byte)
1 Byte 0x00~0xFF. (high byte)
1 Byte 0x00
1 Byte 0x00
Size Value
1 Byte 1 ~ 247
1 Byte 0x64
1 Byte 0x41
1 Byte 0=>OK, 0xFF=>error