DL-10 – RS-485 Remote Temperature and Humidity
3. Getting Started
This chapter provides a basic overview of how to configure and operate your DL-10 module.
3.1 Connecting the Power and the Host PC
Prepare for device
RS-232 to RS-485 Converter: tM-7520U (optional)
Exterior power supply device: MDR-20-24 (optional)
Wiring
Connect both the DL-10 module
and the Host PC via the tM-7520U.
Connect the Vcc pin to positive
terminal on a 10 ~ 30 V
and connect the GND pin to the negative
terminal.
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.
D+
D-
GND
power supply,
DC
CA-0915 Cable
Vcc
Power Supply
+10 ~ +30 V
(e.g., MDR-20-24)
DC
- 7 -