Sub-Fc 36 (0X24): Set Power-On Value/Power Failure Memory Mode - ICP DAS USA IR-310-RM User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

5.4.10 Sub-FC 36 (0x24): Set Power-on value/Power failure memory mode

There are "preset power-on values" mode and "power failure memory" mode to set
relay states after power restoration. Power failure memory mode records the 10 relay
states after the change of the relay states occurs and the latency is up. This is useful
for some application such as lighting control after the power restoration.
Only one of the two modes can be set to IR-310-RM by this sub-FC.
‧Request
Byte order Description
00 Address
01 FC
02 Sub-FC
03 Relay value
setting
‧Response
Byte order Description
00 Address
01 FC
02 Sub-FC
03 Set result
IR-310-RM, IR Controlled 10-ch High Power Relay Module (Ver. 1.1, Jul/02/2013) 43
Size Value
1 Byte 1 ~ 247
1 Byte 0x64
1 Byte 0x24
0=>Apply "preset power-on values".
1 Byte
1=>Apply "power failure memory values".
Size Value
1 Byte 1 ~ 247
1 Byte 0x64
1 Byte 0x24
1 Byte 0=>OK, 0xFF=>Error.