Mitsubishi Electric M700V Series Manual page 412

MITSUBISHI CNC
III Functional Specifications
(2) Outline drawing
(a) Master station (NC unit)
(b) or
(c) Sequencer CPU
(d) Master station
(e) Remote I/O station
(f) Remote device station
(g) Local station
(h) Local station (NC unit)
(i) Partner manufacturer product
Master station
Local station
Remote I/O station
Remote device station
Intelligent device station
III - 410
(a)
(i)
(e)
(h)
This station controls the remote station and local station.
One master station is required for one system.
This station contains the CPU and can communicate with the master and
the other local stations.
Remote station that handles only bit information.
Remote station that handles bit information and word information.
This station allows the transient transmission. (Including local station)
(d)
(b)
(c)
CC-Link
(b) (c)
(e)
(f)
(g)