Mitsubishi Electric M700V Series Manual page 272

MITSUBISHI CNC
III Functional Specifications
12.3 High-speed and High-accuracy Functions [kBPM:k Block per Minute]
12.3.1 High-speed Machining Mode I (G05P1) Max.[kBPM]
M720VW
△ 16.8
M system
L system ―
This function runs a machining program that approximates a free curve with fine segments at a high speed.
This is effective in increasing the speed of machining dies with a free curve.
The command format is as follows.
G05 P1
G05 P0
In addition to the G05P0 command, the high-speed machining mode I is canceled with the following
commands.
- High-speed machining mode II (G05P2)
- High-speed high-accuracy control I (G05.1Q1)
- High-speed high-accuracy control II (G05P10000)
Fine segment capacity
G1 block fine segment capacity (for 1mm segment)
Mode
High-speed machining mode Ⅰ G05 P1
The above performance applies under the following conditions.
- 6-axis system (including spindle) or less
- 1-part system
- 3 axes or less commanded simultaneously in G01
- Block containing only axis name and movement amount (Does not contain macro or variable
command)
- During G61.1 high-accuracy control mode or during cutting mode (G64)
It may not be possible to attain the specified feed rate if deviated from the above conditions.
III - 270
M730VW M750VW M720VS
△ 16.8 △ 16.8 △ 16.8
― ―
: High-speed machining mode I start
: High-speed machining mode I cancel
Command Maximum feed rate when 1mm segmentG1 block is executed
16.8 m/min
M730VS M750VS
△ 16.8 △ 16.8
― ― ―