Table of Contents
Advertisement
MS Configurator supports the following servo parameter automatic adjustment function and data
measurement function.
<Waveform measurement function>
Frequency response
measurement
Frequency response
measurement of machine
Measurement function (with
program creation function)
<Automatic adjustment function>
Initial notch filter setup
Velocity loop gain adjustment
Time constant adjustment
Position loop gain adjustment
Lostmotion adjustment
Lostmotion 3 adjustment
<Environment setup>
Communication path setup
Program creation
<Assistance setup function>
Parameter setup
15.4.6 Automatic Backup
M720VW
M system
○
L system
○
With this function, system data, ladder program and custom software can be automatically backed up in
case of system failure. Up to the three most recent backup data can be stored.
The backup execution timing can be set with parameters.
Measures the frequency response (speed command - speed FB) of speed loop for the
:
designated axis. The result will be presented as Bode diagram.
Measures the frequency response (torque command - speed FB) of machine system for the
:
designated axis. The result will be presented as Bode diagram.
Measures the Chronological data measurement, Arc shape error measurement,
:
Synchronous tapping error measurement, Measuring arbitrary path.
:
Automatically adjusts the notch filter when the initial resonance is large.
:
Automatically adjusts the notch filter and the speed loop gain.
:
Automatically adjusts the acceleration/deceleration time constant.
:
Automatically adjusts the position loop gain.
:
Automatically adjusts the quadrant protrusion amount of the designated axis.
Automatically adjusts the lost motion type 3 for the quadrant protrusion amount of the
:
designated axis.
:
Sets the path to communicate with NC. The model of connected NC is selected.
:
Creates machining programs for adjustment.
:
Saves/changes the servo parameters.
M730VW
M750VW
○
○
○
○
M700V Series Specifications Manual
M720VS
M730VS
M750VS
○
○
○
○
15 Safety and Maintenance
○
○
III - 353
Advertisement
Table of Contents
