Mitsubishi Electric M700V Series Manual page 228

MITSUBISHI CNC
III Functional Specifications
12.1.4 Mirror Image
12.1.4.1 Mirror Image by Parameter Setting
M720VW
M system ○
L system ○
A parameter is used to designate the axis for which the mirror image function is to be executed before the
machining program is run.
When mirror image is set to ON by the parameter, an operation which is symmetrical on the left and right or
at the top or bottom is performed.
Each axis has its own parameter.
12.1.4.2 Mirror Image by External Input
M720VW
M system ○
L system ○
Signals from an external device (PLC) to request the mirror image operation either while a machining
program is running or before it is run.
When ON has been set for mirror image from an external device, an operation which is symmetrical on the
left and right or at the top or bottom is performed.
Each axis has its own request signal.
III - 226
M730VW M750VW M720VS
○ ○
○ ○
M730VW M750VW M720VS
○ ○
○ ○
M730VS M750VS
○ ○ ○
○ ○ ○
M730VS M750VS
○ ○ ○
○ ○ ○