Mitsubishi Electric M700V Series Manual page 390

MITSUBISHI CNC
III Functional Specifications
17.2.12 Tool Center Point Control
M720VW
M system ―
L system ―
The tool center point control function controls so that the position command in the machining program is at
the tool center point on the coordinate system (table coordinate system) which rotates together with the
workpiece. This function can be applied with the 5-axis machine including the tool tilt type with two rotary
axes on the head (Fig. 1 (a)), the table title type with two rotary axes on the table (Fig. 1 (b)), and the
compound type with rotary axes on the tool and table (Fig. 1 (c)).
(a)
(a) <Tool tilt type>
(b) When tool center point control is OFF and tool length compensation along tool axis is ON
(c) Controls so that the holder center point moves straight.
(d) When tool center point control is ON
(e) Controls so that the tool center point moves straight.
(f) Rotation center
(g) Program path
(h) Tool center point path
(i) Fig. 1 (a)
III - 388
M730VW M750VW
― △
― ―
(b)
(f)
(g)
(c)
(h)
(i)
M720VS M730VS M750VS
― ―
― ―
(d)
(f)
(e)
△
―