Mitsubishi Electric M700V Series Manual page 121

8.4 2nd Miscellaneous Functions (B)
8.4.1 2nd Miscellaneous Functions
M720VW
M system ○
L system ○
The code data and start signals are output when an 8-digit number is assigned following the address code A,
B or C - whichever does not duplicate the axis name being used.
Processing and complete sequences must be incorporated on the PLC side for all 2nd miscellaneous
commands.
(Note 1) This function requires a built-in PLC.
(Note 2) There are some screens in the setting and display unit that cannot display all eight digits.
M730VW M750VW M720VS
○ ○
○ ○
M700V Series Specifications Manual
8 Spindle, Tool and Miscellaneous Functions
M730VS M750VS
○ ○ ○
○ ○ ○
III - 119