Mitsubishi Electric M700V Series Manual page 85

6.2 Operation Methods and Functions
6.2.1 Operation Input
M720VW
M system ○
L system ○
In addition to the method of directly inputting numeric data, a method to input the operation results using four
rules operators and function symbols can be used for specific data settings.
Numeric values, function symbols, operators and parentheses ( ) are combined and set in the data setting
area.
The operation results appear when the INPUTkey is pressed. If the INPUT key is pressed again, the data is
processed and displayed on the screen. The contents in the data setting area are erased.
Examples of operator settings and results
Operation Setting example
Addition = 100+50
Subtraction = 100-50
Multiplication = 12.3*4
Division = 100/3
Function = 1.2*(2.5+SQRT(4))
6.2.2 Absolute/Incremental Value Setting
M720VW
M system ○
L system ○
When setting the data, the absolute/incremental setting can be selected from the menu.
The absolute/incremental settings can be selected on the following screens.
- Common variable screen
- Tool compensation amount screen
- Coordinate system offset screen
6.2.5 Displayed Part System Switch
M720VW
M system ○
○
L system
The part system displayed on the screen can be changed with the [$<->$] keys.
The number of displayed part systems is counted by one each time the [$<->$] keys are pressed. The
screen corresponding to that part system opens.
If the number of displayed part systems exceeds the valid number of part systems, the number of displayed
part systems will return to 1.
M730VW M750VW M720VS
○ ○
○ ○
Function symbols, setting examples and results
Operation
Function
results
Absolute
150.000
value
Square
50.000
root
49.200 Sine
33.333 Cosine
Tangent
5.4
Arc tangent ATAN
M730VW M750VW M720VS
○ ○
○ ○
M730VW M750VW M720VS
○ ○
○ ○
M700V Series Specifications Manual
M730VS M750VS
○ ○ ○
○ ○ ○
Function
Setting example
symbol
ABS = ABS(50-60)
SQRT = SQRT(3)
SIN = SIN(30)
COS = COS(15)
TAN = TAN(45)
= ATAN(1.3)
M730VS M750VS
○ ○ ○
○ ○ ○
M730VS M750VS
○ ○ ○
○ ○ ○
6 Operation and Display
Operation
results
10
1.732
0.5
0.966
1
52.431
III - 83