MITSUBISHI CNC
III Functional Specifications
11.2.5 Graphic Trace
11.2.5.1 Graphic Trace
M720VW
M system
△
L system
△
This function draws the machine tool's machine position. The movement path following the actual automatic
operation or manual operation, or the tool tip movement path can be drawn, and the machine operation
during machining can be monitored.
For the display mode, 1-plane, 2-plane and 3-dimensional display are provided. In the 3-dimensional display
mode, cubic shapes can be rotated and tracing of the figure seen from the desired direction can be
assigned.
Options related to 5-axis control (tool tip center control, tool length compensation along the tool axis, tool
handle feed & interruption) are required for the trace of tool path.
III - 166
M730VW
M750VW
M720VS
△
△
△
△
M730VS
M750VS
△
△
△
△
△
△